Gardena - Oscillating Sprinkler Aqua S 220/2Enjoy every inch of summer – with the Aqua S oscillating sprinkler from GARDENA. The sprinkler ensures that your lawn and plants are evenly and precisely watered without forming puddles in the process. The Aqua S is designed for areas of 90 to 220 m² and can be set up in the blink of an eye.Just place it on the lawn and set the range anywhere between 7 and 17 metres using the slider. The width range of the Aqua S is max. 13 metres. Once the hose is connected, you can turn on the water and your plants will be reliably watered. It’s not just good for the plants, it also allows you to spend more time on other things. The durable material with metal components ensures that the sprinkler remains firmly on the ground. It is also worth noting that the Aqua S is protected against frost as well as UV radiation, meaning that it doesn’t always need to be removed from the lawn after use. The 5-year manufacturer’s guarantee further highlights its top-quality, together with the Made in Germany-seal. Cleaning the Aqua S is as simple as setting it up. The water connection has a built-in metal filter, which can be taken out very easily by rotating the connection. Then, just hold it under running water to clean it off. If lime builds up on the nozzles, use the needle provided: it is located at the other end of the sprinkler in a screw cap. Use it to unclog the nozzles with a quick poke.Always nice and evenThe nozzles of the Aqua S oscillating sprinkler continuously ensure even and highly precise lawn watering on areas of 90 to 220 m². The uniform watering also prevents puddles from forming.As easy as pieAssembling the oscillating sprinkler by hand and connecting a hose takes just a few steps. Use the slider to set the range (7–17 metres) as well as the type of watering. It allows you to water just one side (left or right) instead of watering both at the same time. The width of the spray always remains max. 13 metres.As clean as a whistleThe water connection of the Aqua S has a rust-free metal filter that prevents dirt particles from entering the oscillating sprinkler. It can be removed so that you can clean it off easily under a tap. Use the needle located in the sprinkler’s screw cap to remove any lime deposits from the nozzles.